Model NO.: BOSJ-S
Customized: Customized
Advantage: Easy to Maintenance
Condition: New
Control System: PLC Control System
Processing Methods: Pre-Galvanized
Making Machine: Multifunctional
Material of Roller: Gcr 15
Machine Type: Automatic
Thickness: 1.2-1.8mm
Production Speed: 8m/Min
Power: 30kw
Trademark: BOSJ
Transport Package: Suitable Size Container for Machine
Origin: Jaingsu China
HS Code: 8455212000
Marine Steel Scaffolding Planks Board Walkboard Roll Forming Machine
1,Unit performance
 
The thickness of material sheet: 1.2-1.8,the product drawings need to be confirmed by buyer
 
The width of material: 250≤§≤520
 
Product speed: 0-8m/min
 
Occupy groud area:  length 30m xwidth 3m
 
Total power: about 62kw
 
2,Equipment structure
 
It is composed of passived-decoiler, leveler, servo feeding machine, punching machine, roll forming machine, hydraulic cutting machine, collection table, electrical control system etc.
 Stainless Steel Building Scaffolding Walkborad Roll Forming Machine Factory

3,Each part main parameter:
 
3,1 Passived Decoiler 
Decoiler: decoiler,  Inner expanding type,  capacity:5T
Inner diameter material roll: ¢480~¢520mm
Outter diameter material roll: ≤1500mm
 
3,2 Leveler
Motor: 7.5KW  Frequency conversion motor
 
3,3 Servo Feeding machine
Drive: 4 kw  Servo motor
 

3,4 Punching machine
punching press: JF21-110
Maximum press: 110tons
Material of mould: Material:Cr12Mov,  Quenching,Hardness:HRC58-62º
Quantity of punching dies:1sets
 
3,5 Forming machine
Rack: cast iron frame,  
Forming stations: 16 stations
Material of bearing 40Cr, quenching treatment  
Material:GCr15, Quenching, Hardness:HRC58-62º
Motor power:  30KW Frequency conversion motor ZQ500 reducer
Drive type:  every rack has one gear power distribution box.
 
3,6 Hydraulic cutting
Hydraulic pressure cutting 
Hydraulic pressure pump:5.5KW
Material of cutting blade: Cr12, Quenching
Hydraulic cutting quantity:1piece

Stainless Steel Building Scaffolding Walkborad Roll Forming Machine Factory

 
3,7 Electronic controlling: PLC 
 
 
Main Machine Parameter
No. Item Unit Data Remark

1 		Raw material Type   MS\galvanized sheet  
Strength of panel Map ≥350  
Thickness of panel mm 1.2~2.0  
2 Size mm See figure  
3 Speed m/min 6~8  
4 Material of roller   GCr15Hardening treatment  
5 Drive type   Gear box  
6 Total power kw About 45  
7 Electrical system   PLC Inverter control  
8 Contour dimension(L*W*H) m 35X4X3.9  
 
Delivery of machine


Related Products
The details of the scaffolding machine
NO. CONTENTS
1 Scaffolding plank standing tube welding device
2 Scaffolding plank ledger welding device
 
3		  
Punching Device		 Full automatic punching device
Semi-automatic punching device
Manual punching device
Spare part:punching mould
 
4		  
diagonal brace flattening &punching device		 Full automatic diagonal brace flattening &punching device
Semi automatic  diagonal brace flattening &punching device
Manual  diagonal brace flattening &punching device
Spare part:punching mould
 
5		  
Tube cutting machine		 Auto Blade cutting Device
Swing saw cutting device
Direct saw cutting device
Auto direct saw cutting device
6 Auto Scaffolding plank wedling line Auto robot welding
Auto robot hand welding
7 Base jack & U-head jack welding device
8 Auto scaffolding plank roll forming machine

Introductions of the scaffolding machine
1. Scaffolding plank standing tube welding device
 Equipment function:
It is mainly used in auto seam welding for steel tubular scaffold pipe and disk plate, it also can add
Main Parameter:
Length:1-3m
Tube diameter:¢48mm &¢60mm
Disk plate quantity:1-6 pcs
Length tolerance:≤0.5mm
Basic component:
It consists of 13 sets inveter gas welding device and special device
More standing tube choices:
 
 
 
2. Scaffold ledger welding device
Equipment function:
  It is mainly used in auto seam welding for steel tubular scaffold ledger wedge head and tube.
Main Parameter:
Length:0.5-3m
Tube diameter:¢48mm
Welding quantity:2 pcs
Length tolerance:≤0.5mm
Basic component:
It consists of 2 sets inveter gas welding device and special device
More ledger choices:
 
 Stainless Steel Building Scaffolding Walkborad Roll Forming Machine Factory

 
3. Scaffold tube punching device
Equipment function:
   It is mainly used in punching holes for standing tube ends
Basic parameter:
Length: 1-3m
Tube diameter:¢48mm&¢60mm
Length tolerance: ≤0.5mm
Basic component:
It consists of auto feeding system, seam positioning system (it only works at full auto equipment),hydraulic punching system, auto collection system(it only works at full auto equipment) and other systems.
 
 
4. diagonal brace flattening &punching device
Equipment function:
It is mainly used in flattening &punching for diagonal brace both ends
Basic parameters:
Length:0.5~3m
Tube diameter:¢33mm or ¢48mm
Length tolerance:≤0.5mm
Basic component: It consists of auto feeding system, seam positioning system(it only works at full auto equipment),hydraulic punching system, auto collection system(it only works at full auto equipment) and other systems.
 Stainless Steel Building Scaffolding Walkborad Roll Forming Machine Factory

 
5.Tube Cutting Machine
Main function:
It is mainly used tube cutting
Basic parameter:
Length:0.6~3m
Tube diameter:¢33m,¢48mm and ¢60mm
Length tolerance:≤0.5mm

Auto Blade cutting device:
 
Saw tube cutting device:
 
6.Auto scaffold welding device
 
Main function:
It is mainly used in auto welding for scaffold end cap and stiffener
Basic parameter:
Length:0.6-3m
Length tolerence:≤1mm
Basic component:
No. Name Type Quanti. Remark
1 Welding robot hand 4200X650X500 1 Double welding head
2 Welding power supply(optional) MAGMEET350 2 Supplied by buyer
3 Working clamp   2  
4 positioner   2 optional
5 Moving rail and parts 13m 1  
6 Electric control system   1  
 
 Stainless Steel Building Scaffolding Walkborad Roll Forming Machine Factory

 Adjustment screw welding device
 
Equipment function:
It is mainly used in welding for scaffolding base and U-head jack screw.
Basic parameter:
Length:0.3-1.0m
Length tolerance:≤0.5mm
Basic component: It consists of welding device and special device.
 
 
 

Jeep Wrangler Exterior Accessories

Jeep Tj Exterior Accessories,Jeep Wrangler Exterior Trim Kit,Jeep Wrangler Tj Exterior Accessories,Jeep Wrangler Exterior Parts

Danyang Weisheng Automotive Technology Co., Ltd , https://www.wizsinparts.com