〠Water pump is not water】 ã€Insufficient amount of water Bearing fever
Preform Mould Spare Parts includes preform cavity, preform neck screw, preform core, slider, heating blockes and die set.
PET Preform Mould adopted DuPont chemical material, imported Germany Hotset, USA imported heating ring, Japan needle, brass graphite plate to ensure good lubrication effet etc.
Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about mould insert.
Preform Mould Spare Parts,Preform Core,Preform Caivty ,Preform Neck Screw WENZHOU WINIBER MACHINERY EQUIPMENT CO., LTD. , https://www.winibermachinery.com
-------------------------------------------------- ------------------------------
â‘ lack of water pump, plus enough water storage;
â‘¡ inlet leakage, check the inlet pipe;
â‘¢ seal damage, replace the pad seal or pump stuffing box;
â‘£ pump impeller damage, replace the impeller;
⑤ suction stroke is too high, reducing suction stroke.
-------------------------------------------------- ------------------------------
â‘ filter or impeller blockage, remove blockage;
â‘¡ speed is not enough, adjust the speed;
â‘¢ filter submerged depth is not enough, increasing the depth of submergence;
â‘£ seal wear, replace the seal ring;
⑤ pump reverse, correct.
-------------------------------------------------- ------------------------------
â‘ deterioration or too little oil, replacement or additional;
â‘¡ pump shaft bending, correction or replacement;
â‘¢ pump bearings with the gap is wrong, overhaul;
â‘£ bearing wear, replacement.
Power consumption is too large
-------------------------------------------------- ------------------------------
â‘ serious wear and tear bearings, replacement;
â‘¡ pump shaft bending, correction or replacement;
â‘¢ impeller improper installation, maintenance adjustments;
â‘£ improper installation of the pump, adjust.