Garment Steamer,Hand Steamer,Handheld Garment Steamer,Handheld Steam Iron Ningbo Norjia Bell Electric Appliance Co., ltd , https://www.norjiabell.com
7.6LPM/2.0GPM 30PSI
Description
1. Run dry without damage (Run Dry Capability)
2. Quick-connect plug-in ports for easy installation (Hose Kit Included)
3. Self-priming
4. Gnition & Thermally Protected
Specifications
How a Diaphragm Pump Works:
The pump is driven by an AC or DC moto
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamberhas a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
Motor Voltage
12/24V DC
Type
3 chamber diaphragm pump, self priming, capable of being run dry
Mode
Demand or bypass
Certifications Option
CE Approval
Liquid Temperature
140°F (60°C) Max.
Priming Capabilities
6 feet (1.8 m)
Max Pressure
45psi (3.1bar)
Max Flow rate
11.6lpm (3.0gpm)
Thermal Overload Protected
Start working when temperature reach 90°C(+-10%)
Inlet/Outlet Ports
10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice.
Duty Cycle
Intermittent (under different pressure the continuous working time will also be different)
Motor options
2 pin connector
On/off switch
Model
Switch
GPM/LPM
PSI/BAR
Max Draw
(A)Valves
Diaphragm
Ports
Voltage
Wire
Connections
SFDP1-030-045-33
Demand
3.0/11.6
45/3.1
8.0
EPDM
Santoprene
1/2"-14 MNPT
12V
2-Pin/Leads
SFDP2-030-045-33
Demand
3.0/11.6
45/3.1
4.0
EPDM
Santoprene
1/2"-14 MNPT
24V
2-Pin/Leads
SFDP1-028-040-33
Demand
2.8/10.0
45/3.1
8.0
EPDM
Santoprene
1/2"-14 MNPT
12V
2-Pin/Leads
SFDP2-028-040-33
Demand
2.8/10.0
45/3.1
4.0
EPDM
Santoprene
1/2"-14 MNPT
24V
2-Pin/Leads
7.6LPM/2.0GPM 30PSI
Description
1. Run dry without damage (Run Dry Capability)
2. Quick-connect plug-in ports for easy installation (Hose Kit Included)
3. Self-priming
4. Gnition & Thermally Protected
Specifications
How a Diaphragm Pump Works:
The pump is driven by an AC or DC moto
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamberhas a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
Motor Voltage
12/24V DC
Type
3 chamber diaphragm pump, self priming, capable of being run dry
Mode
Demand or bypass
Certifications Option
CE Approval
Liquid Temperature
140°F (60°C) Max.
Priming Capabilities
6 feet (1.8 m)
Max Pressure
45psi (3.1bar)
Max Flow rate
11.6lpm (3.0gpm)
Thermal Overload Protected
Start working when temperature reach 90°C(+-10%)
Inlet/Outlet Ports
10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice.
Duty Cycle
Intermittent (under different pressure the continuous working time will also be different)
Motor options
2 pin connector
On/off switch
Model
Switch
GPM/LPM
PSI/BAR
Max Draw
(A)Valves
Diaphragm
Ports
Voltage
Wire
Connections
SFDP1-030-045-33
Demand
3.0/11.6
45/3.1
8.0
EPDM
Santoprene
1/2"-14 MNPT
12V
2-Pin/Leads
SFDP2-030-045-33
Demand
3.0/11.6
45/3.1
4.0
EPDM
Santoprene
1/2"-14 MNPT
24V
2-Pin/Leads
SFDP1-028-040-33
Demand
2.8/10.0
45/3.1
8.0
EPDM
Santoprene
1/2"-14 MNPT
12V
2-Pin/Leads
SFDP2-028-040-33
Demand
2.8/10.0
45/3.1
4.0
EPDM
Santoprene
1/2"-14 MNPT
24V
2-Pin/Leads
Model NO.: SFDP2-020-030-33
Certification: ISO9001:2008, CE, UL
Condition: New
Application Field: Industry
Voltage: 24V
Flow Rate: 7.6lpm/2.0gpm
AMPS: 3.0A Max
Pressure: 30psi/2.1bar
Port Dimension: 0.82"(20.95mm)
Diaphragm: Santoprene
Valve: EPDM/Viton
Protection: Thermal/Ignition Protection
Application: RV/Marine/Yachts/Boat/Caravan/Water System,Ect
Trademark: SEAFLO
Transport Package: Strong Carton/Poly Foam.
Specification: CE
Origin: Fujian, China
HS Code: 8413509090
Model NO.: SFDP2-020-030-33
Certification: ISO9001:2008, CE, UL
Condition: New
Application Field: Industry
Voltage: 24V
Flow Rate: 7.6lpm/2.0gpm
AMPS: 3.0A Max
Pressure: 30psi/2.1bar
Port Dimension: 0.82"(20.95mm)
Diaphragm: Santoprene
Valve: EPDM/Viton
Protection: Thermal/Ignition Protection
Application: RV/Marine/Yachts/Boat/Caravan/Water System,Ect
Trademark: SEAFLO
Transport Package: Strong Carton/Poly Foam.
Specification: CE
Origin: Fujian, China
HS Code: 8413509090
SEAFLO AC/DC high flow industrial water transfer pump