Model NO.: JK03RD/JK06RD/JK12D
Heat Energy: 25% Electricity+75% Air Source (Free)
Drying Capacity: 200 T0 2500 Kg Per Batch
Drying Temperature: 10~75c
Heating Capacity: 42kw
Cooling Capacity: 32kw
Dehumidify Amount: 12~100 L/H
Control System: Automatic
Electric Consumption: 15kwh Per Hour
Trademark: KINKAI
Transport Package: Plywood
Specification: ISO, CCC
Origin: China
HS Code: 8419399090
Professional factory made fruit vegetable industrial tray dryer

What are KINKAI Industrial Tray Dryer?

KINKAI Heat pump industrial tray dryer takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried.
This kind of dryer is mainly composed of heat pump dryer and drying chamber.
This dryer will be controlled by touch screen controller, and the temperature can be adjusted. It has low electric consumption.
Professional Factory Made Fruit Vegetable Industrial Tray Dryer

Used For
Dry vegetables like tomato, potato, garlic, ginger, radish, lettuce, pumpkin, carrots, spinach, cassava etc
Dry fruits like  apple, lemon, mango slices, dried plum, dried pineapple, apricot, pear, etc
Dry meat:  Sausage, beef, duck, ham etc
Others it can dry noodle/ wooden /stick incense/herbs /flowers etc.

Functions

Heating drying max temp 75C
Cooling drying min temp 10C
Heating +dehumidify drying

Technical Parameters
Single Dryer + Drying Chamber
Model Unit JK03RD JK06RD JK12RD
Power Input KW 4.8 8.5 15
Power Supply V/PH/HZ 380V/3PH, 50/60HZ 380V/3PH, 50/60HZ
220V/1PH, 50/60HZ
Rated Current A 9.6A(380V), 22A(220V) 17 30
Heating Capacity KW 10.5 21 42
Cooling Capacity KW 7.8 18 32
Dehumidify L/H 12 25 50
Max. Temperature ºC ≤75 ≤75 ≤75
Working Condition ºC 0-43 0-43 0-43
Electric Shock Protection Grade I I I
Max. Exhause Pressure Mpa 3 3 3
Noise dB(A) 75 75 75
Power Consumption/ H KWH 4.8 8.5 15
Electric Heater KW 3 6 12
Blowing Type / Horizontal Blowing 360ºC
Dimension Of Dryer MM 1675x860x1280 1760x1060x1280 2120x1360x1590
Weight KG 295 385 540


Features of KINKAI Industrial Tray Dryer
1, Energy saving
Adopt heat pump technology, absorb heat from air and recovery waste heat at the same time
Adopt close dehumidify + circulating drying type, saving operating cost;
 
2, Exact control temperature and humidity
The drying temperature can be easily controlled by PLC +Touch Screen control system.
 
3, Uniform drying
By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so the raw materials can be dried evenly
 
4, The temperature: 10-75°C, Max 75°C, similar nature drying.
 
5, The baking plate dimensions and materials can customize as customer request.
 
6, Good drying quality.
During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good rehydration, keep nutrient content;
 
7, Safe and reliable operation
Automatic intelligent control, 24-hour continuous drying; Without waste gas and waste heat pollution,low noise


Professional Factory Made Fruit Vegetable Industrial Tray Dryer
Professional Factory Made Fruit Vegetable Industrial Tray Dryer


Our Factory
Professional Factory Made Fruit Vegetable Industrial Tray Dryer


Customers Visited Us
Professional Factory Made Fruit Vegetable Industrial Tray Dryer


Package and Delivery

For heat pump dryer parts---with plywood
For drying chamber +trolleys
  If shipped with 20ft container or 40ft container, no packing
  If shipped with LCL( less than container load), packed in plywood
Professional Factory Made Fruit Vegetable Industrial Tray Dryer


Our Services
A. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
 
 
B. After-sales service
1, Technical support for your installation, operation and maintenance. 
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.

















 

The Knurled Swage Standoff are available in Aluminum ,Brass,Stainless steel, Steel  materiall.

The Hole Specifications

Plain Swage Standoff – A plain swage standoff (no knurl) requires a STRAIGHT HOLE. The hole diameter in the board or panel is the same as the shank (or shoulder) diameter of the standoff with a tolerance of +.003″/-.000″ (+.076 mm/-.000 mm).


Knurled Swage Standoff

Knurled Swage Standoff,Slotted Cup Head Stainless,Stainless Steel Knurled Swage Standoff,Back Face Knurled Swage Standoff

Shenzhen Long Wei Wang Precision Technology Co., Ltd. , https://www.electronichdwe.com