Round Open Water Cooling Tower The whole structure is solid and light;the body and water pond is manufactured with reinforced glass fibre (FRP glass fiber reinforced plastics),never being corrosive. The surface finish is added with ultraviolet inhibitor,which can resist sunshine attack and damage.
Apply special design PVC water block curtain (water-stop) to prevents plashing) remarkably; pressure drop loss is slight and splashing loss i under 0.001%.
Apply cellular vacuum molding heat dissipation material, stagger arrangement surface has grooves and the heat exchange effect is especially good.
Round Open Water Cooling Tower,Water Cooling Tower,Round Cooling Tower,Cool Water Towers Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com
Car coke has always been the most troublesome maintenance aspect for riders, but if you pay attention to good driving habits during daily driving, you can greatly reduce the formation of car carbon deposits. Here are some basic tips.
1. Do not drive for long periods of time
The idle time is long and the time required for the engine to reach normal temperature becomes longer. After the gasoline is sprayed on the back of the valve, the evaporation speed is slow, and carbon deposition occurs. At the same time, often idling, the air flow into the engine is also small, so that the erosion of carbon deposition is also very weak, it will promote the deposition of carbon deposits.
2, pay attention to the timing of flameout
For cars equipped with turbocharger, do not turn off immediately after driving at high speed or after climbing. Turn off at 10 minutes after idling. The car equipped with a turbocharger will form carbon deposits faster than normal suction. The car is several times faster.
It is recommended that the vehicle owners perform the free-to-remove cleaning of the air intake system every 20,000 to 40,000 kilometers under the conditions of regular maintenance, that is, using the dedicated equipment-specific method for the inlet of the vehicle without dismantling the engine. The carbon deposition operation is performed at the sites where carbon deposition is likely to occur, such as valves, oil passages, and the like.
3, use clean gasoline
Gasoline impurities are the main component of carbon deposition, so the cleanliness of gasoline has a weak tendency to form carbon deposits. However, it should be noted that high labeling does not necessarily mean high quality. The labeling only represents the octane number of the oil and does not represent quality and cleanliness. Some car owners use gasoline cleaners in gasoline to ensure the cleanliness of gasoline. This can effectively prevent the formation of a carbon deposit on the metal surface, and can gradually activate the original carbon particles and remove it slowly, thereby protecting the engine from harm. However, the addition of gasoline cleaner must be careful, if you add a counterfeit product will have the opposite effect.
All steel and iron material is processed through galvanizing by dipping,Ocorrosion resisting and durable.
Special designed axial-flow type air blower applies belt reduction gear,reducing low noise and sufficient wind; tailor-made water-drop noise
reduction carpet to eliminate water sound.
Water pond applies slant design, easy to wash, containing less water; the operating weight is lower, but the water tank is very big, so it won't absorb air.
The cooling tower support is light and solid, convenient to assembly no matter there is suspension iron rack or not.