Model NO.: 4hp
Material: Copper
Motor: Aluminium Wire
Power: 2200W
Voltage/ Frequency: 220V/50Hz
Exhaust Pressure: 0.8MPa
Current: 7.5A
Revolving Speed: 2850rpm
Volume of Gas Storage Tank: 40L
Cylinder: 1X51mm
Gas Tank Size: 545mm X 260mm(Dia)
Motor Highth: 4HP=156PCS Silicon Steel Sheet
Trademark: luogesen
Transport Package: Export Carton
Specification: 690x280x600mm
Origin: China
HS Code: 8414809090
Scope of application:
Using for Pushing Pneumatic Nail Gun, Air Screw , Spray Painting Gun to work, also use to miniature instrument, blowing dust, Air inflation for small car and so on.
Product  Feature:
  1. High Power, high efficiency, low energy, high reliability.
  2. Piston Ring: New ECO circle, low friction coefficient, Auto lubricating system.
  3. Cylinder Liner: Surface hardening, deplete hardness, Accelerate the heat transfer, long using time.
  4. Suction and exhaust valve: Using advanced foreign technology.
  5. Multiple Pressure: Overload protection


 

Power:

2200w

Voltage:     

220V

Exhaust Pressure:    

0.8Mpa

Current:      

7.5A

Frequency:   

50HZ

Revolving Speed:

2850rpm

Volume of Gas Storage Tank:

40L

Cylinder:     

51mm


Miniature Rotary Compressor R134A Compressor Tire Air Compressor Tire Inflator Compressor
Miniature Rotary Compressor R134A Compressor Tire Air Compressor Tire Inflator Compressor
Miniature Rotary Compressor R134A Compressor Tire Air Compressor Tire Inflator Compressor
Miniature Rotary Compressor R134A Compressor Tire Air Compressor Tire Inflator Compressor
















 

For LIUGONG Cylinder Seal Kit

Precautions for daily maintenance of hydraulic cylinders
1. Regularly inspect the sealing components of the hydraulic cylinder, such as O-rings and gaskets, to ensure that they are intact and undamaged. If there is wear or aging, they should be replaced in a timely manner.
2. Regularly check the liquid level of the hydraulic cylinder and keep it within the specified range. If the liquid level is too low, add hydraulic oil in a timely manner.
3. Regularly inspect the connection parts of the hydraulic cylinder, such as oil pipes and joints, to ensure their tightness and reliability. If there is any looseness, it should be tightened in a timely manner.
4. Regularly clean the outer surface of the hydraulic cylinder to prevent dust, sand, and other debris from entering the interior of the cylinder and affecting its normal operation.
5. Regularly inspect the surface of the piston rod of the hydraulic cylinder, and promptly repair or replace it if there are scratches or wear.
6. Regularly inspect the hydraulic system of the hydraulic cylinder, and promptly handle any problems such as oil leakage or unstable pressure.
7. When the hydraulic cylinder is not in use for a long time, its hydraulic oil should be drained to avoid oil aging, deterioration, and affecting the normal operation of the hydraulic system.
8. When repairing or replacing hydraulic cylinders, attention should be paid to safety to avoid sudden movement or pressure release of the hydraulic cylinder, which may cause personal injury or equipment damage.


For Liugong Cylinder Seal Kit,For Liugong Swing Motor Seal Kit,Center Joint Seal Kit For Liugong,Center Joint Seal Kit Liugong

Safe Seal Technology Co., Ltd. , https://www.sprsealkits.com