Plate and frame Filter Press is mainly composed of many filter plates and filter frames arranged at intervals. The plate and frame of the plate and frame filter press are mostly made into a square, with small holes at the corner ends, which form channels for the filtration slurry or washing water to circulate after being assembled and pressed. Both sides of the frame are covered with filter cloth, and the empty frame and filter cloth form a space to accommodate the filter slurry and filter cake, and the Filter Plate is used to support the filter cloth and provide a channel for the filtrate to flow out. Grooves are made on both sides of the filter plate, which communicate with the washing water channel and the filter outlet respectively. The filter plate is divided into washing plate and non-washing plate, and its structure and function are different. Each plate and frame filter press has a total number of frames, the number is determined by the production capacity and the solid concentration of the suspension, up to 60. When the number of frames is small, a blind plate can be inserted to cut off the channel for the filter slurry to flow. Plate And Frame Filter,Plate Frame Filter,Plate And Frame Press,Recessed Plate Filter Press Shenzhen Hongfa Environmental Protection Equipment CO., LTD , https://www.hongfafilterpress.com
High Quality,Compective Price,Series Typies
Welcome Inquiry
Techincal Parameters
Material Specification
Aluzinc steel and galvanized steel.
Thickness
WLFM51-326.5-980, 0.75 mm to 1.5mm;
WLFM75-300-900, 0.75mm to 1.50mm.
Main Motor Power
22kw (two sections of machine, each secton has one motor with 11kw).
Hydraulic Station Power
7.5kw.
Feeding Width
1000mm
Cover Width
920mm
Steel Stress
G450 ~ G550.
Roll Forming Speed
12 m/minute.
Cutting Tolerance
+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm
Hydraulic Uncoiler
Max. capacity: 8'000kgs.
Coil Inner Diameter
508mm.
Voltage
As per customer's request.
Numbers of Stations
26 stations
Type of Cutting
Roll-formed and length-set profile cutting.
 Material of Main Equipment
Roller Material
High grade S45C forged steel, coated with hard chrome; some important roller wheels are chosen Cr12 mold steel, coated with hard chrome.
Active Shaft Material
High grade S45C carbon wrought steel, diameter 85mm.
Electric Elements
PLC control console, touch screen and transducer, from Mitsubishi, Japan.
Other elements, from Schneider Electric, Germany.
Cutter blades
Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.
Packaging & Shipping
Company Profile
FAQ
Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician.Â
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.
Model NO.: Decking Machine
Material: PPGI,PPGL,Pre-Painted Steel Sheet
Motor Power: 2.75kw
Warranty: 12 Month
Trademark: WILLING INT′L
Transport Package: Sea Worthy Fixed by Wire Rope, Wooden Blocks
Specification: CE Standard, ISO 9001-2008
Origin: China R. P
HS Code: 84552210
Pneumatic Automatic Stacker System Metal Machine