Modern false twist texturing (DTY) machines are equipped with up to four nip roller feeds per texturing position. Nip rollers have a major impact on the drawing process and therefore exert a direct influence on the quality of the textured yarn. Our products ensure a significant reduction in power consumption while maximizing productivity.
Stop twister is used in the false twisting process of synthetic fibers and is intended to prevent twisting. Therefore, it is also called a non-twist wheel. There are two types: metal with hard chrome plating and ceramic.
rotating parts,plastic texturing chuck,draw textured yarn machinery,barmag dty parts Yixing Aurora Ceramic Technology Co., Ltd. , https://www.auroracera.com
Operation Parameter
Diameter
DN50-800mm
Capacity
10-8000 m3/h
Head
3-120m
Liquid Temperature
up to 60 ºC
Operation pressure
up to 18 bar
Application Fields
Municipal works, buildings, industrial sewageÂ
Sewage treatment to discharge the sewage
Waste water transfer project
Rainwater containing solids and long fibers
√ WQ Submersible Sewage pump  Advantage have to say!!
     Lower construction cost  √ Â
     Intelligent control for safe operation  √Â
Details Characteristic advantage for WQ series Submersible Sewage pump Â
1. Most of the impellers with the pump of an aperture below 400 come as a bi-runner impeller and few of them is a multi-blade centrifugal impeller. While most of the impellers with the pump of an aperture 400 and above come as a mixed flow impeller and few of them is a bi-runner impeller. The spacious pump casing runner lets the solids easily passing and the fibers uneasily wrapping so that it is most suitable for
discharging sewage and dirt.
Â
2. Two independent single end-face mechanical seals are in-series mounted, with the installation mode as the internal installation mode, and, compared with the external installation mode, the medium is more uneasy to leak and also its sealing friction pair are easier lubricated by the oil in the oil chamber. A special spiral slot or a small seam is used to resist the solid grains to be deposited on the mechanical seal by the pump to make sure of its stable work. The unique mechanical seal layout mode and bearing combination makes the suspension arm of the shaft short, a heavy rigidity and a small jump, more benefit for reducing the leak from the mechanical seal and extending the life of it.
3. The motor of a protective grade IPX8 works in submerged mode and holds the best cooling effect. The grade F insulation makes the winding bearable to a higher temperature and, compared with common motors, more durable.
4. The perfect combination of the special electric control cabinet, the liquid level floating-ball switch and the protective components carries out the automatic monitor and alarm for water leak and winding overheat, the protections at shortcircuit, overload, lack-of-phase and voltage-lost cut-off, the accurately auto-controls of start, stop, alternation and minimum submerged depth of the pump, without need of special persons for looking-after, option at will is available between the selfcoupled reducing start and electronic soft start. All of these makes sure of safe and reliable use of the pump without any worry.
5. Both motor and hydraulic parts are directly linked together, without need of turning the shaft for centering, easily disassembled and assembled to save the time, benefit for the site maintenance, reducing the stopped time, saving the cost of repair; simple and compact structure leaves a small volume, only simple lifting equipment is needed, as a special lifting handler is set on the pump; less land area and the pump can be placed directly in the sewage pond, without need of a special pump house, and the therefore the construction investment can be saved by over 40.
6. Available with five installation modes for you to choose: auto-coupled, movable hard-pipe, movable soft-pipe, fixed wet type and fixed dry type installation modes.
The auto-coupled installation means the connection between the pump and the water-out pipeline is made with the water outlet pipe seat of the auto-coupling, without use of the common fasteners, and, when to separate the pump from the water outlet pipe seat, just place it down along with the guide rod and then lift it, simply enough to get free from worry and trouble and save time.
The submersible sewage pump in the fixed dry type installation not only can replace the old vertical sewage pump but also does not fear of flood submersion, so there is no need of a separate flood-proof facility, benefit for lowering the cost of construction.
Both movable hard-pipe and soft-pipe installations, as well as the fixed wet type one, are all the very simple modes of installation.
7. AÂ motor cooling system can be set with the pump, which can not only sufficiently cool the motor but also be helpful for lowering the level of the sewage pond so as to discharge the sewage therein to the utmost degree.
8. The pump works in the submerged mode, so there is no noise problem and benefit for environmental protection.
 
Main parts for WQ submersible sewage pump
Part
MaterialÂ
Pump casing &Â Pump cover
Cast iron, Ductile iron, Stainless steel
Impeller
Cast iron, Ductile iron, Stainless steel, Bronze, Duplex SS
Motor casing
Cast iron
Shaft
2Cr13, 3Cr13, Duplex SS
Mechnical seal
Frictional pair
Graphite/ Silcon Carbide
Graphite/ Tungsten Carbide
Silcon Carbide/Silcon Carbide
Silcon Carbide/Tungsten Carbide
Tungsten Carbide/Tungsten Carbide
Â
Â
Spring
Stainless steel
Â
Rubber part
NBR
More details for WQ submersible Sewage pumps please check with our engineer.
Â
Company Image for TONGKE Flow
Service
Twenty years design and engineering experience and More than ten years over sea market Experience. Tongke provide most professional and thoughtful Pre-sales and After service.
Technical training                  Equipment evaluation
Installation and debugging    Troubleshoot
Maintenance                          Update and improvement
Commitment to the service
1.One-year warranty. Provide technical support free all-life of the products.
2.Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.
3.Hot-line of service is available in 24h, responded in 8h.
Your call and mail is welcome at any time
ContactÂ
Mr Seth Chen
Telphone
0086-13817768896
Email
Â
Operation Parameter
Diameter
DN50-800mm
Capacity
10-8000 m3/h
Head
3-120m
Liquid Temperature
up to 60 ºC
Operation pressure
up to 18 bar
Application Fields
Municipal works, buildings, industrial sewageÂ
Sewage treatment to discharge the sewage
Waste water transfer project
Rainwater containing solids and long fibers
√ WQ Submersible Sewage pump  Advantage have to say!!
     Lower construction cost  √ Â
     Intelligent control for safe operation  √Â
Details Characteristic advantage for WQ series Submersible Sewage pump Â
1. Most of the impellers with the pump of an aperture below 400 come as a bi-runner impeller and few of them is a multi-blade centrifugal impeller. While most of the impellers with the pump of an aperture 400 and above come as a mixed flow impeller and few of them is a bi-runner impeller. The spacious pump casing runner lets the solids easily passing and the fibers uneasily wrapping so that it is most suitable for
discharging sewage and dirt.
Â
2. Two independent single end-face mechanical seals are in-series mounted, with the installation mode as the internal installation mode, and, compared with the external installation mode, the medium is more uneasy to leak and also its sealing friction pair are easier lubricated by the oil in the oil chamber. A special spiral slot or a small seam is used to resist the solid grains to be deposited on the mechanical seal by the pump to make sure of its stable work. The unique mechanical seal layout mode and bearing combination makes the suspension arm of the shaft short, a heavy rigidity and a small jump, more benefit for reducing the leak from the mechanical seal and extending the life of it.
3. The motor of a protective grade IPX8 works in submerged mode and holds the best cooling effect. The grade F insulation makes the winding bearable to a higher temperature and, compared with common motors, more durable.
4. The perfect combination of the special electric control cabinet, the liquid level floating-ball switch and the protective components carries out the automatic monitor and alarm for water leak and winding overheat, the protections at shortcircuit, overload, lack-of-phase and voltage-lost cut-off, the accurately auto-controls of start, stop, alternation and minimum submerged depth of the pump, without need of special persons for looking-after, option at will is available between the selfcoupled reducing start and electronic soft start. All of these makes sure of safe and reliable use of the pump without any worry.
5. Both motor and hydraulic parts are directly linked together, without need of turning the shaft for centering, easily disassembled and assembled to save the time, benefit for the site maintenance, reducing the stopped time, saving the cost of repair; simple and compact structure leaves a small volume, only simple lifting equipment is needed, as a special lifting handler is set on the pump; less land area and the pump can be placed directly in the sewage pond, without need of a special pump house, and the therefore the construction investment can be saved by over 40.
6. Available with five installation modes for you to choose: auto-coupled, movable hard-pipe, movable soft-pipe, fixed wet type and fixed dry type installation modes.
The auto-coupled installation means the connection between the pump and the water-out pipeline is made with the water outlet pipe seat of the auto-coupling, without use of the common fasteners, and, when to separate the pump from the water outlet pipe seat, just place it down along with the guide rod and then lift it, simply enough to get free from worry and trouble and save time.
The submersible sewage pump in the fixed dry type installation not only can replace the old vertical sewage pump but also does not fear of flood submersion, so there is no need of a separate flood-proof facility, benefit for lowering the cost of construction.
Both movable hard-pipe and soft-pipe installations, as well as the fixed wet type one, are all the very simple modes of installation.
7. AÂ motor cooling system can be set with the pump, which can not only sufficiently cool the motor but also be helpful for lowering the level of the sewage pond so as to discharge the sewage therein to the utmost degree.
8. The pump works in the submerged mode, so there is no noise problem and benefit for environmental protection.
Â
Main parts for WQ submersible sewage pump
Part
MaterialÂ
Pump casing &Â Pump cover
Cast iron, Ductile iron, Stainless steel
Impeller
Cast iron, Ductile iron, Stainless steel, Bronze, Duplex SS
Motor casing
Cast iron
Shaft
2Cr13, 3Cr13, Duplex SS
Mechnical seal
Frictional pair
Graphite/ Silcon Carbide
Graphite/ Tungsten Carbide
Silcon Carbide/Silcon Carbide
Silcon Carbide/Tungsten Carbide
Tungsten Carbide/Tungsten Carbide
Â
Â
Spring
Stainless steel
Â
Rubber part
NBR
More details for WQ submersible Sewage pumps please check with our engineer.
Â
Company Image for TONGKE Flow
Service
Twenty years design and engineering experience and More than ten years over sea market Experience. Tongke provide most professional and thoughtful Pre-sales and After service.
Technical training                  Equipment evaluation
Installation and debugging    Troubleshoot
Maintenance                          Update and improvement
Commitment to the service
1.One-year warranty. Provide technical support free all-life of the products.
2.Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.
3.Hot-line of service is available in 24h, responded in 8h.
Your call and mail is welcome at any time
ContactÂ
Mr Seth Chen
Telphone
0086-13817768896
Email
Â
Model NO.: WQ
Power: Electric
Start Up: Electric Pump
Type: Submersible Pump
Application: Submersible Pump, Sewage Pump, Mix Flow Pump
Industry: Irrigation and Flood Control
Media: Water and Sewage Water
Performance: No Leakage Pump
Theory: Centrifugal Pump
Certificate: ISO
OEM: Ok
Paint: Black
Liquid Temperature: 60c
Operation Pressure: up to 18 Bar
Trademark: TONGKE
Transport Package: Wooden-Case
Specification: DN50-DN800
Origin: China
HS Code: 8413709990
Model NO.: WQ
Power: Electric
Start Up: Electric Pump
Type: Submersible Pump
Application: Submersible Pump, Sewage Pump, Mix Flow Pump
Industry: Irrigation and Flood Control
Media: Water and Sewage Water
Performance: No Leakage Pump
Theory: Centrifugal Pump
Certificate: ISO
OEM: Ok
Paint: Black
Liquid Temperature: 60c
Operation Pressure: up to 18 Bar
Trademark: TONGKE
Transport Package: Wooden-Case
Specification: DN50-DN800
Origin: China
HS Code: 8413709990
WQ Submersible Sewage water Pump
    Easy Installation  √Â
    Submergence resisting  √ Â
    Lower running cost  √Â
    Environmental protection  √Â
    Easy Installation  √Â
    Submergence resisting  √ Â
    Lower running cost  √Â
    Environmental protection  √Â