As a globally-recognized supplier of complete sets of power generation units , Fiat Power Technologies unveiled the Dubai Middle East Power Show from February 17 to February 19, 2013 to showcase its full range of products and services. Based on four engine series for three different configurations (G-Drive, open and soundproof units), Fiat Powertech's new products in the G-Drive configuration are changing every day. This batch of new products was developed not only to meet emission regulations, but also in countries with high demand for high power, low fuel consumption, and small body size. Especially NEF 4.5-liter engine , the previous configuration can only reach the power range of 47kW to 98kW, and now upgraded to the power range of 52kW to 120kW. The NEF 6.7-liter engine, which matches the mechanical pump injection system, was upgraded to a power range of 156kW to 170kW. The power boost of both engines is attributed to the combustion optimization of high-performance fuel injectors and the calibration of specific fuel pumps. Also based on specific calibration data, the CURSOR series G-Drive units have been optimized. Customers can now choose a 300kW 8.7-liter engine to replace the original 10.3-liter engine to achieve the same power target. Fiat PowerScience's new generator product line achieved a 20% increase in power compared to the original power segment. The average power density in the 120kW and 300kW products was 11% higher than that of the competitors, making them the best of the two power segments. Another important benefit for customers is the reduction in body size and displacement. Instead of a six-cylinder machine with a four-cylinder engine in the 120kW power section or an 8.7-liter engine in the 300kW power section instead of the 10.3-liter engine, it is easy to install. This advantage is critical. For example, the leasing of units requires frequent changes of installation locations or the installation of fixed units in confined spaces. In addition, these small-size engines are more economical than larger ones, ensuring the same quality and performance. Fiat Power Technology Global Supply Generator Set Fiat Power Technologies products include engines, G-Drives, and standard generator sets. The products cover major applications including temporary power generation and self-generation, special facilities, factories, and after-sales services. Fiat's power generation engine product line includes the F5, NEF, CURSOR and VECTOR series covering 31 to 740 kWm. F5 series engine, 4 cylinders, 3.2 liters, power range from 31 to 56 kW. The NEF series includes four-cylinder 4.5-liter and six-cylinder 6.7-liter engines with power ranging from 45 to 218 kW. Fiat's G-Drive configuration at the 2013 Middle East Power Show and the new N45 engine in the development genset configuration, as well as the new N67 engine G-Drive configuration. CURSOR series engines, 6 cylinders, 8.7 liters, 10.3 liters and 12.9 litres, power range from 195 to 398kW. Fiat demonstrated the new C87 engine in the G-Drive configuration at the 2013 Middle East Power Show. VECTOR series engine, V-type 8-cylinder, 20.1 liters, power coverage 610 to 740kW. According to the above, the G-DRIVE configuration of Fiat's generator engine has been designed for installation by major OEMs. Fiat Power Technology can not only provide products for major OEMs, but also provide product customization, open or closed units, configuration of different bases, motors and control panels. Fiat Power Technologies Power Generation Engine and Maintenance Network Fiat Power Technology's generator engines are used all over the world to ensure the customized needs of customers in local areas. Its production base is located in France, Italy, Brazil and China. The reliability of Fiat Power not only depends on its products, but also its strong after-sales network. With over 1400 sales and after sales service stations worldwide, we provide professional services for sales and after-sales services to meet customer needs.
What is Extruded Finned Tube
Aluminum extruded finned tubes, also called [integral finned tubes" using the form of the base tube covered with aluminum tube(the base tube can be carbon steel, stainless steel, copper) through machine extrusion, forming a tube fin, the fin base and the tube outer wall is close fitting, this fin tubing control can make finned tubes with high heat transfer coefficient and heat transfer performance. Extruded finned tube can be made of iron, copper or aluminum tube by compound rolling, which has the advantages of tight bonding, small thermal resistance, good heat transfer performance, high strength, small flow loss, strong anti-corrosion performance, not easy to deformation under long-term hot and cold working conditions, long working life and so on.
Copper Finned Tube,Finned Copper Tube,Aluminum Fin Tubes,Low Finned Tube Murphy Thermal Energy Co., Ltd. , https://www.murphyfinnedtube.com