Product Introduction                                  Squeeze injection pump (squeeze pump, hose extrusion pump) can be used for long-distance transportation of high-concentration, high-viscosity materials such as lime mortar, cement slurry pulp and so on. The squeeze injection pump is ideal for grouting in mine tunnels, railway tunnels, hydropower projects, geotechnical slopes, underground engineering, subways and municipal construction, as well as blast furnace repair and building wall painting in iron and steel and chemical engineering. equipment.  Parameters                                           Extrusion Grouting Pump Model YGJYB-2 YGJYB-5 Fluid Flow 5 m³/h Pressure 0.3 Mpa 0.8 Mpa Mixing ratio (water : cement sand) 1:0.5 (<5MM particle) Convey Distance Vertical 30 m Horizontal 60 m Voltage 380V three-phase 50Hz Motor Power 3 kw 4 kw Extrusion Tube Inside Dia. 38 mm 51 mm Transport Tube Inside Dia. 32 mm 38 mm Dimensions 1100*600*500 mm 1300*800*900 mm Weight 260 kg 400 kg   Product Display                                      1. Extrusion injection pump is compact in structure, easy to use, safe and easy to repair; 2. Low speed, high efficiency, no noise, wide use; 3. It can not only inject mortar, grout, with air compressor and spray gun, but also spray. Henan Yugong Machinery Co.,Ltd. is specialized in machinery in China over 20 years. We are committed to researching and developing all kinds of construction machinery  etc. Our company has more than 500 employees,including more than 30 senior technical staff and 30 international sales persons.We can supply high quality and professional services. Henan Yugong Machinery Co., Ltd aims to have top quality, top reputation and top service. "Quality First, Reputation First, Be Innovative, Be Excellent" has always been our purpose. We warmly welcome your corporation from all fields and build great future for us. Product Introduction                                  Squeeze injection pump (squeeze pump, hose extrusion pump) can be used for long-distance transportation of high-concentration, high-viscosity materials such as lime mortar, cement slurry pulp and so on. The squeeze injection pump is ideal for grouting in mine tunnels, railway tunnels, hydropower projects, geotechnical slopes, underground engineering, subways and municipal construction, as well as blast furnace repair and building wall painting in iron and steel and chemical engineering. equipment.  Parameters                                           Extrusion Grouting Pump Model YGJYB-2 YGJYB-5 Fluid Flow 5 m³/h Pressure 0.3 Mpa 0.8 Mpa Mixing ratio (water : cement sand) 1:0.5 (<5MM particle) Convey Distance Vertical 30 m Horizontal 60 m Voltage 380V three-phase 50Hz Motor Power 3 kw 4 kw Extrusion Tube Inside Dia. 38 mm 51 mm Transport Tube Inside Dia. 32 mm 38 mm Dimensions 1100*600*500 mm 1300*800*900 mm Weight 260 kg 400 kg   Product Display                                      1. Extrusion injection pump is compact in structure, easy to use, safe and easy to repair; 2. Low speed, high efficiency, no noise, wide use; 3. It can not only inject mortar, grout, with air compressor and spray gun, but also spray. Henan Yugong Machinery Co.,Ltd. is specialized in machinery in China over 20 years. We are committed to researching and developing all kinds of construction machinery  etc. Our company has more than 500 employees,including more than 30 senior technical staff and 30 international sales persons.We can supply high quality and professional services. Henan Yugong Machinery Co., Ltd aims to have top quality, top reputation and top service. "Quality First, Reputation First, Be Innovative, Be Excellent" has always been our purpose. We warmly welcome your corporation from all fields and build great future for us.
A pressure vessel is a vessel that can withstand high pressures and is commonly used for storing, transporting, and processing various gases, liquids, and gaseous liquid mixtures. The pressure vessel is mainly composed of vessel body, flange, seal, support and accessories. Common pressure vessels are gas cylinder, gas storage tank, distillation tower, reactor and so on.
The design and manufacture of pressure vessels must comply with relevant national standards and specifications, and pass strict inspection and testing to ensure their safety and reliability. During use, you must comply with the operation regulations and safety precautions, and periodically check and maintain the device to ensure its normal operation and safe use.
The main business scope is various heaters, waste heat boilers, pressure vessels, supportingair preheaters, air coolers, furnace accessories and accessories, and provide equipment installation, with EPC ability of projects. At present, our customers have covered all large and medium-sized petrochemical enterprises in China and established long-term strategic cooperative partnership with them. Products are exported to Southeast Asia, Middle East, and other regions.
Pressure Vessel,Reactor Tanks Vessel,Reactor Equipment Sales,Stainless Steel Reaction Reactor Jiangsu Gelan Environmental Technology Co., LTD , https://www.glkj2010.com
 
2 m³/h
A pair of rollers rotates in a lubricated pump chamber. The rollers and the chamber wall compress the hose and flatten the hose. As the roller rotates, the place where the hose is flattened gradually moves from the inlet end to the outlet end of the pump.
In this process, the hose filled with liquid gradually recovers its original shape under the effect of its own elasticity, and the volume becomes larger, thereby creating a vacuum to suck the material, the hose at the outlet end is gradually squeezed, the volume becomes smaller, and the material is forcibly discharged. In this way, the material is continuously sucked in and discharged. The applicable temperature of the pump is ≤80°C.
Working                                           Â
Â
Â
Contact Us                                         Â
 
Â
2 m³/h
A pair of rollers rotates in a lubricated pump chamber. The rollers and the chamber wall compress the hose and flatten the hose. As the roller rotates, the place where the hose is flattened gradually moves from the inlet end to the outlet end of the pump.
In this process, the hose filled with liquid gradually recovers its original shape under the effect of its own elasticity, and the volume becomes larger, thereby creating a vacuum to suck the material, the hose at the outlet end is gradually squeezed, the volume becomes smaller, and the material is forcibly discharged. In this way, the material is continuously sucked in and discharged. The applicable temperature of the pump is ≤80°C.
Working                                           Â
Â
Â
Contact Us                                         Â
Â
Model NO.: Ygjyb-5
Certification: ISO9001: 2000, CE
Condition: New
Color: Red
Product Name: Extrusion Grouting Pump
Application: Mortar, Cement Grouting
Model: Ygjyb-5
Power: 4 Kw
Voltage: 380V Three-Phase 50Hz
Fluid Flow: 5 M3/H
Pressure: 0.8 MPa
Convey Distance: Vertical 30 M Horizontal 60 M
Extrusion Tube Inside Dia.: 51 mm
Transport Tube Inside Dia.: 38 mm
Trademark: YUGONG
Transport Package: Standard Wooden Case
Specification: 380V three-phase 50Hz
Origin: China
HS Code: 8413501090
Model NO.: Ygjyb-5
Certification: ISO9001: 2000, CE
Condition: New
Color: Red
Product Name: Extrusion Grouting Pump
Application: Mortar, Cement Grouting
Model: Ygjyb-5
Power: 4 Kw
Voltage: 380V Three-Phase 50Hz
Fluid Flow: 5 M3/H
Pressure: 0.8 MPa
Convey Distance: Vertical 30 M Horizontal 60 M
Extrusion Tube Inside Dia.: 51 mm
Transport Tube Inside Dia.: 38 mm
Trademark: YUGONG
Transport Package: Standard Wooden Case
Specification: 380V three-phase 50Hz
Origin: China
HS Code: 8413501090
Construction Equipment Squeeze Mortar Pump Hose Squeeze Pump