Wall Mounting Magnets,Neodymium Cup Magnets,Mounting Holding Magnets,Industrial Mounting Magnets Anfeng Industrial Co.,Ltd , https://www.afmagnets.com
*The materials are uniformly distributed on the mesh-belt by feeder. The mesh-belt generally adopts 12-60 mesh stainless steel mesh and it is driven by a transmission device and moves inside the dryer.
*The dryer is composed of several sections. For each section, the hot air is circulated separately. Part of offgas is exhausted by a special exhaust fan. The waste gas is controlled by a regulating valve. The hot air passes through the mesh-belt covered with materials from up to down or from down to up, and then to finish the heat and mass transfer.
*The mesh-belt moves slowly, and its running speed can be freely adjusted according to the material property. The final products after the drying process will fall into the material collector continuously. The upper and lower circulation zones can be freely equipped according to the user's requirements. The number of section can be selected according to the production demands as well.
Features:
1. Air volume, heating temperature, dwell time and feeding velocity can be adjusted in order to get the best drying effect.
2. The configuration is flexible. Belt washing system and products cooling system can be used.
3. Most of the air can be circulated and utilized so the energy is greatly saved.
4. Unique air distribution device, making the hot air distribute uniformly and the consistent product quality.
5. Heat source: steam, conducting oil, electricity, coal furnace or oil burner.
Application:
Dehydrated vegetable,
Pellet feed,
Gourmet powder,
Shredded coconut stuffing,
Organic plastics,
Compound rubber,
Acrylic fiber,
Medicine,
Crude medicine,
Small wooden product,
Plastic product,
Aging and curing for the electronic components.
Technical Data:
                   Model
DW-1.2-8
DW-1.2-10
DW-1.6-8
DW-1.6-10
DW-2-8
DW-2-10
Number of zones
      4
        5
      4
       5
     4
      5
Belt width (m)
                1.2
               1.6
               2
Drying section length (m)
      8
        10
      8
      10
     8
    10
Spreading thickness of material (mm)
10-80
Temperature (º C)
50-120
Steam pressure (Mpa)
0.2-0.6
Steam consumption (Kg/h)
120-300
150-375
150-375
170-470
180-500
225-600
Drying time (h)
0.2-1.2
0.25-1.5
0.2-1.2
0.25-1.2
0.2-1.2
0.2-1.5
Drying strength (kg water/h)
60-160
80-220
75-220
95-250
100-260
120-300
Quantity of fan
5
6
5
6
5
6
Total power of fan (kW)
9.9
12.1
9.9
12.1
18.2
22.2
Total power of equipment (kW)
11.4
13.6
11.4
13.6
19.7
23.7
 Overall dimensions
L (m)
10.05
12.05
10.05
12.05
10.05
12.05
W (m)
1.5
1.5
1.91
1.91
2.33
2.33
H (m)
3.15
3.15
3.15
3.15
3.65
3.65
Total weight (KG)
4800
5780
5400
6550
6350
7800
Company Profile:
The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.
The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.
For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.
With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.
Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.
Q&A:
1. Q: Please describe your warranty period.
   A: 15 months after the equipment is arrived at the destination port or 12 months after  the installation and commissioning of the equipment, whichever comes first.
2. Q: Do you provide on-site installation and commissioning?
  A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.
3. Q: How about the cost of on-site installation and commissioning guidance?
   A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.
4. Q: Are you a factory or a trading company?
   A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing.Â
Â
Model NO.: DW
Material: Stainless Steel
Structure: Air Flow Drier
Type of Flow: Contra-Flow
Appearance of Dried Sample: Pastes
Operational Method: Continuous
Trademark: ChangAo
Transport Package: Support
Specification: FCL
Origin: Changzhou
HS Code: 8419399090
Working Principle:
Changzhou Aokai Drying Equipment Co., Ltd. was established in 2004, and is specialized in the design, manufacturing and development of the drying, calcination, cooling, crushing, mixing and granulating equipment. Aokai is located in Benniu Town Xinbei District of Changzhou City, close to Beijing-Shanghai Railway, Shanghai-Nanjing Expressway and Changzhou Airport.