An excavator grading beam is a specialized attachment that can be fitted to an excavator. It is designed to help with grading, leveling, and excavating tasks. The grading beam is typically made of high-strength steel and is equipped with a series of teeth or blades that can be adjusted to different angles and depths. Grading Beam Excavator ,Excavator Grade Beam,Tilting Grading Beam,Rotating Grading Beam CATSU Hydraulic Machinery Equipment Co.,Ltd , https://www.tiltrotatorcat.com
The carbon dioxide detector is placed in the middle of the air collecting device of the outdoor fault soil. The gas gathering device is generally located in the sand layer 5 to 10m deep below the ground surface. The host is installed in the observation room, and the sensor is connected to the host computer cable. Its length is about 15m. Use station "15" network protocol communication. During the test, continuous, stable and reliable observation data of carbon dioxide detectors were obtained. The experiment proved the feasibility of carbon dioxide infrared gas sensing technology in the measurement of carbon dioxide fault gas and dissolved gas.
For artesian wells, dissolved gas can be used for observation. The gas collection mode is degassing. A degassing system can be shared with the current station's automatic helium detector. The carbon dioxide detector can be connected to the gas path of the automatic helium detector. Communication and faults can be used. The gas observation mode is the same. In order to adapt to the harsh working environment in the wild, the instrument is designed with a three-level power surge protection overvoltage protection circuit.
The CO2 detector uses a dual-beam infrared CO2 sensor, which is a compact infrared gas sensor that combines mature infrared absorption gas detection technology with micro-machining and sophisticated circuit design. The CO2 detector also has a function of temperature compensation, which is less dependent on oxygen. It can be used in various places where carbon dioxide gas is present. It has a wide range of applications and is versatile. Intelligent, low-maintenance, low-cost, long-life instrument.
The grading beam is attached to the excavator's arm, and the operator can use the machine's hydraulic controls to adjust the angle and depth of the teeth or blades. This allows the operator to precisely control the amount of material being excavated or leveled.
Excavator grading beams are commonly used in construction and landscaping projects, where they can be used to prepare building sites, level ground, and excavate trenches. They are also used in agricultural applications, such as land leveling and drainage work.
Overall, the excavator grading beam is a versatile and efficient tool that can help save time and effort on a range of excavation and grading tasks.
The new digital CO2 detector has significant differences and advantages in the amount of observation information and accuracy compared with the manual observation, mainly because the instrument is characterized by its strong stability, high sensitivity, automation, and intelligent characteristic design. Replace the former observation method. Carbon dioxide detectors do not need to observe the rotation in different places such as groundwater dissolved gas, station fault escape gas, etc., and can automatically record dynamic changes.