Standard Caliber PET Preform Mould
Standard Caliber PET Preform Mould is an injection mould, which is suitable for producing PET preforms. There are many preforms with different neck and weight for different bottles, such as the carbonated bottle, mineral water bottle, , pesticide bottle, oil bottle, hot fill bottle etc.
PET bottle preform mould includes 4cavity, 6 cavity, 8 cavity, 12cavity, 16cavity, 24 cavity, 32 cavity, 48 cavity, 72 cavity and 96 cavity.
PET mold neck includes: ROPP 25, Alaska 26.75, PCO1881, PCO1880, 29/25, 30/25, 38mm, 45mm etc
Pet Mold,Pet Blow Molding,Pet Preform Mould Price,Pet Bottle Preform Mould WENZHOU WINIBER MACHINERY EQUIPMENT CO., LTD. , https://www.winibermachine.com
Technical Parameters
1. Measuring range: Frequency: 10 ~ 300Hz
Amplitude: 0 to 200 μm *, 0 to 300 μm or 0 to 500 μm (peak to peak)
Intensity: 0~20mm/s*, 0~30mm/s or 0~40mm/s (true RMS)
Technical Parameters:
â—† External power supply: 220V AC or 24V DC
â—† Input
Signal: Receive a signal from a VS Series Vibration Speed ​​Sensor
Sensitivity: 20mV/mm/s±5%
Frequency response: 5 ~ 300Hz
◆ Range: 0 ~ 500μm (peak - peak) or 0 ~ 50.0mm / s (true RMS)
â—† LED indication: OK green, Alert, Danger red.
◆ Measurement error: ±1% of full scale
◆ Current output: 4~20mA active, output load ≤500Ω
◆ Alarm point setting: 0~100% full scale, accuracy ±1%
â—† Alarm reset mode: automatic or manual (site reset button, remote alarm reset terminal)
â—† Relay seal: epoxy resin, node capacity DC30V/5A or 220V/5A, single pole double throw
â—† Power-on delay: about 10 seconds
◆ Temperature range: -25°C～+65°C during operation, -40°C～+85°C during storage
â—† Relative humidity: up to 95%, no condensation
Axis displacement transmitter protection instrument SDJ-302, SDJ-301
â—† External power supply: 220V AC or 24V DC
â—† Input
Signal: Receive a signal from a VS Series Vibration Speed ​​Sensor
Sensitivity: 20mV/mm/s±5%
Frequency response: 5 ~ 300Hz
◆ Range: 0 ~ 500μm (peak - peak) or 0 ~ 50.0mm / s (true RMS)
â—† LED indication: OK green, Alert, Danger red.
◆ Measurement error: ±1% of full scale
◆ Current output: 4~20mA active, output load ≤500Ω
◆ Alarm point setting: 0~100% full scale, accuracy ±1%
â—† Alarm reset mode: automatic or manual (site reset button, remote alarm reset terminal)
â—† Relay seal: epoxy resin, node capacity DC30V/5A or 220V/5A, single pole double throw
â—† Power-on delay: about 10 seconds
◆ Temperature range: -25°C～+65°C during operation, -40°C～+85°C during storage
◆ Relative humidity: up to 95%, non-condensing Measurement range: Amplitude: 0 ~ 500μm (peak-to-peak);
Intensity: 0 ~ 50.0mm / s (true RMS);
- Frequency range: 5 to 3000 Hz;
- Measurement accuracy: 0.5, linear error ≤ ± 0.5%;
- Output signal: current output: 4 ~ 20mA, load resistance ≤ 850Ω;
- Use environment: -40 ° C ~ 65 ° C, relative humidity ≤ 95% (non-condensing);
- Power supply voltage: DC24V power consumption ≤ 1W;
Dynamic signal output is available. The transmitter is easy to install and debug, has excellent frequency response characteristics, high measurement accuracy, good stability and long service life; and built-in high temperature impact protection, overload protection, reverse connection protection, lightning protection; optional vibration range Optional two-wire, three-wire, four-wire and other wiring methods; if necessary, you can select the header with live LCD display. Long-term rotation of wind turbines, pumps, compressors, engines, fans, generators, motors, steam turbines, turbochargers, etc.
The magneto-electric vibration sensor and precision measuring circuit are integrated to form a high-precision vibration measuring system. The transmitter can be directly connected to DCS, PLC or other equipment. It is an ideal choice for measuring vibration of factory equipment such as fans, motors and pumps.
Axis displacement transmitter protection instrument SDJ-302, SDJ-301