Recently, the largest domestic tonnage underground continuous wall hydraulic grab - the first XCMG XG700E in the Hangzhou Metro show. The geological conditions in Hangzhou are complex. The underground 0-20m is the sand layer, the 20-50m is the silt layer, and the 50-64m is the dense pebble layer. XCMG XG700E takes advantage of its reliability, fast lifting speed, strong power, short opening and closing time, strong intrusion ability of hard stratum, etc., and directly grabs the groove. The single trough section takes about 26 hours to grab the trough, and the average fuel consumption is 50L. /h, construction efficiency and pressure on the same field of peer products, the project department's unanimous praise.

国内最大吨位地下连续墙液压抓斗徐工XG700E
The largest domestic tonnage underground continuous wall hydraulic grab XCMG XG700E

Xugong XG700E, compared with the previous models, has greatly improved and upgraded in terms of reliability, power, efficiency, noise emission, and grabbing capacity. It is the largest continuous tonnage hydraulic grab in the country with a dedicated main engine, with engine power. Strong, many advantages and advantages in hard formations, large load conditions and more prominent advantages.

国内最大吨位地下连续墙液压抓斗徐工XG700E在杭州地铁施工
The largest domestic tonnage underground continuous wall hydraulic grab XCMG XG700E construction in Hangzhou Metro

1. The engine power is increased to 315kW, the power is strong, and the advantages in hard stratum and heavy load conditions are more prominent;

2. Imported Rexroth hydraulic control main valve, full liquid control double-volume synchronous receiving and discharging technology, the performance is more reliable;

3. Double-rolling single-row rope technology, the service life of steel wire rope is 2-4 times longer than that of multi-layer rope, and the use cost is lower;

4. High-power temperature-controlled independent hydraulic radiator meets the requirements of high-temperature construction. The radiator fan is automatically adjusted with the oil temperature, and the energy-saving effect is better;

5. Large-span crawler telescopic chassis with a width of 3500-4900mm, safe and stable construction;

6. Dedicated host technology, high structural strength, large maintenance space;

7. Long-guided, large-closed heavy-duty push-plate corrective grabs, hard stratum grabbing efficiency is higher;

8. Intelligent fault monitoring technology and safe operation technology ensure safe construction and convenient operation. (This article is from Xugong)

Related News: Xugong Underground Continuous Wall Hydraulic Grab Construction

Rubber Pump Parts

Not only does MUYUAN offer the complete pumps, we also offer the rubber pump spares parts for a series of pumps, they include the

- Impeller
-Cover plate liner

-Frame plate liner

-Throatubsh

-Back liner
-Others


The properties of the rubber material:
We have variety of natural rubber and elastomers, which can be used for pumping corrosive or acid slurries. But the rubber material is not suitable for slurries which contain sharp solids.
When the slurries contain fine particles, the rubber material features good performance of wear resistant.


Except the rubber pump parts, we can also offer the high chrome pump parts,Polyurethane Pump Parts,Stainless Steel Pump Parts, Ceramic Pump Parts.

Rubber Pump Parts,Rubber Slurry Pump Liner,Rubber Lined Slurry Pump Liner,Rubber Slurry Pump Wet End Parts

SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com