Foundation Flange,Offshore Wind Power Foundation Flange,High Quality Wind Power Foundation Flange,Custom Offshore Wind Power Foundation Flange Shanxi Tianbao Group Co.,Ltd. , https://www.tbflange.com
WRY series hot oil pump has been widely used in heat carrier heating system and has entered the petroleum, chemical, rubber, plastics, pharmaceutical, textile, printing and dyeing, road construction, food and other industries, mainly used for conveying weak corrosion and high-temperature fluid without solid particles, using temperature is less than or equal to 350 DEG C, is an ideal hot oil circulation pump.
WRY,,,,.
WRY series hot oil pump is the second generation product based on the research and development of our company after learning and absorption of foreign oil pump. The basic structure is single-stage single suction cantilever leg supporting, the pump inlet is axial suction, export center vertically upward, mounted on the base with motor.
WRY,,,,.
WRY series hot oil pump is supported by the ball bearings at the both ends supported structure, front end lubricated by lubricating oil, back end lubricated by grease, in the middle there is a guide pipe, for observation the sealing condition at any time and the recycling of conduction oil.
,,,,,,.
The traditional water cooling structure is changed to natural cooling structure, so that the structure is simple, the volume is small, the operation cost is saved, the performance is good, and the use is reliable.
WRY:(1),,,,,.
WRY series hot oil pump:
(1) adopts packing seal and mechanical seal combination, and the packing seal packing with high temperature resistance, with good thermal adaptability, and mechanical seal with high mechanical strength, good wear resistance of hard alloy material, to ensure the sealing performance under high temperature conditions.
(2)(PTFE),,25,.
(2) using the third generation PTFE (PTFE) to do lip type seal, so that the sealing performance leap-forward, 25 times more reliable than the rubber seal reliability, corrosion resistance is very strong.
Â
Model
Capacity
Head
Rotation
Power KW
efficiency
NPSH
m3/h
m
r/min
n%
m
Â
Â
 shaft power
motor power
Â
Â
26-20-100
4.5
15
2825
0.45
0.75
40
0.8
50-32-150
8
22
2840
1
1.5
42
1.6
50-32-160
10
25
2840
1.5
2.2
42
1.8
65-40-160
12.5
25
2880
2.5
3
45
2.2
50-50-170
12.5
32
2890
3.2
4
45
2.5
50-50-150
24
18
2890
3.1
4
46
1.8
65-40-190
18
40
2890
4.5
5.5
52
2.8
65-50-180
32
32
2900
4.5
5.5
52
2.7
65-50-170
40
25
2900
4.5
5.5
52
2.7
65-50-150
52
16
2900
4.2
5.5
52
2.8
65-40-200
25
50
2900
6.7
7.5
63
3.1
80-50-180
40
40
2900
6.7
7.5
63
3.1
80-50-170
60
20
2900
6.7
7.5
63
3.1
100-65-190
60
38
2930
9.2
11
68
3.5
100-65-200
80
40
2930
Offshore Wind Power Foundation Flange
Model NO.: WRY
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
Material: Ss304
Working Temperature: 350ºC
Trademark: HUANGGONG
Transport Package: Polywood
Origin: China(Main Land)
HS Code: 8413701090
Model NO.: WRY
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
Material: Ss304
Working Temperature: 350ºC
Trademark: HUANGGONG
Transport Package: Polywood
Origin: China(Main Land)
HS Code: 8413701090