Model NO.: RP-T601
Trademark: HOPSON TYRE REPAIR
Specification: 60× 110mm; RADIAL12, 1Ply
Origin: Ningbo, China
Model NO.: RP-T601
Trademark: HOPSON TYRE REPAIR
Specification: 60× 110mm; RADIAL12, 1Ply
Origin: Ningbo, China
 
60X110mm Radial Nail Hole Repairs for 2-Piece Repair
 


General Info:

Product name: Radial Patch / HOPSON Passenger Radial Patch
Part No.: RP-T601
Specification: 60*110mm, 1 ply
Packing:10pcs/box, 24box/ctn

Description:

HOPSON radial repair patches are thick, rubber-reinforced patches which allow placement on the tyre in any direction. A special compounding and design allow the repair unit to flex and resist heat, assuring a permanent repair.
 

INSTRUCTIONS:

1. Inspect tyre for repairability using tyre manufacturer of HOPSON LAB guideline. If repairable, mark injury with crayon and carefully remove injuring object.

2. Probe injury to determine exact size and direction, removing all deris.

3. Select the appropriate repair patch for injury and type of tire. Apply prebuff cleaner to repair area and use rubber scraper to remove dirt and Mold lubricants. Using carbide cutter, drill injury channel 3 times from inside then 3 times fron outside, making sure all damaged and rusted cables have been removed and only good rubber remains.

4. Cement the injury channel with Chemical Vulcanizing Cement and install the appropriate vulcanizing insert. Trim flush with the tire innerliner. Mechanically buff outlined repair area to a velvet-like texture. Remove buffing dust with a clean brush or vacuum. Apply Chemical Vulcanizing Cement to buffed area, working into rubber and ALLOW TO DRY THOROUGHLY.

5. Remove backing and center repair patch over injury and thoroughly stitch down from center out to remove trapped air.

6. Finish repair by applying Inner Liner Sealer around edge of repair patch and to overbuff area.
 

NOTE: When you send us inquiry letter , kindly pls include the following information if possible:

Part No.:

Qty:

Which will help us reply to you efficiently. Thank you.

60X110mm Radial Nail Hole Repairs for 2-Piece Repair
60X110mm Radial Nail Hole Repairs for 2-Piece Repair

  Part No. Size(mm)   Description Box Qty Case Qty
  RP-T451 45×75   1 Ply 20  24
  RP-T601 60×110   1 Ply 10  24 
  RP-T651 65×80   1 Ply 10 24 
  RP-T701 70×120 1 Ply   10 24 
  RP-T751 75×125 2 Ply 10 24 
  RP-T752 75×145 2 Ply   10 24 
  RP-T753 75×165 2 Ply 10 24 
  RP-T754 75×220 2 Ply 10 24  
  RP-T755 75×250 2 Ply 10 24 
  RP-T1001 100×125 3 Ply 10 12
  RP-T1002 100×200 4 Ply 10 12 
  RP-T1250 125×150 4 Ply 10 12 
  RP-T1251 125×170 4 Ply 10 12  
  RP-T1252 125×250 5 Ply 10 12  
  RP-T1253 125×330   5 Ply 10 12 
  RP-T1801 180×230   5 Ply 10 8 
  RP-T1802 180×440  5 Ply    5 4 
 RP-T2005 200 ×350 5 Ply 5 4

 
60X110mm Radial Nail Hole Repairs for 2-Piece Repair
 


General Info:

Product name: Radial Patch / HOPSON Passenger Radial Patch
Part No.: RP-T601
Specification: 60*110mm, 1 ply
Packing:10pcs/box, 24box/ctn

Description:

HOPSON radial repair patches are thick, rubber-reinforced patches which allow placement on the tyre in any direction. A special compounding and design allow the repair unit to flex and resist heat, assuring a permanent repair.
 

INSTRUCTIONS:

1. Inspect tyre for repairability using tyre manufacturer of HOPSON LAB guideline. If repairable, mark injury with crayon and carefully remove injuring object.

2. Probe injury to determine exact size and direction, removing all deris.

3. Select the appropriate repair patch for injury and type of tire. Apply prebuff cleaner to repair area and use rubber scraper to remove dirt and mold lubricants. Using carbide cutter, drill injury channel 3 times from inside then 3 times fron outside, making sure all damaged and rusted cables have been removed and only good rubber remains.

4. Cement the injury channel with Chemical Vulcanizing Cement and install the appropriate vulcanizing insert. Trim flush with the tire innerliner. Mechanically buff outlined repair area to a velvet-like texture. Remove buffing dust with a clean brush or vacuum. Apply Chemical Vulcanizing Cement to buffed area, working into rubber and ALLOW TO DRY THOROUGHLY.

5. Remove backing and center repair patch over injury and thoroughly stitch down from center out to remove trapped air.

6. Finish repair by applying Inner Liner Sealer around edge of repair patch and to overbuff area.
 

NOTE: When you send us inquiry letter , kindly pls include the following information if possible:

Part No.:

Qty:

Which will help us reply to you efficiently. Thank you.

60X110mm Radial Nail Hole Repairs for 2-Piece Repair
60X110mm Radial Nail Hole Repairs for 2-Piece Repair

  Part No. Size(mm)   Description Box Qty Case Qty
  RP-T451 45×75   1 Ply 20  24
  RP-T601 60×110   1 Ply 10  24 
  RP-T651 65×80   1 Ply 10 24 
  RP-T701 70×120 1 Ply   10 24 
  RP-T751 75×125 2 Ply 10 24 
  RP-T752 75×145 2 Ply   10 24 
  RP-T753 75×165 2 Ply 10 24 
  RP-T754 75×220 2 Ply 10 24  
  RP-T755 75×250 2 Ply 10 24 
  RP-T1001 100×125 3 Ply 10 12
  RP-T1002 100×200 4 Ply 10 12 
  RP-T1250 125×150 4 Ply 10 12 
  RP-T1251 125×170 4 Ply 10 12  
  RP-T1252 125×250 5 Ply 10 12  
  RP-T1253 125×330   5 Ply 10 12 
  RP-T1801 180×230   5 Ply 10 8 
  RP-T1802 180×440  5 Ply    5 4 
 RP-T2005 200 ×350 5 Ply 5 4

Titanium Wire Electric Lock

Titanium wire lock has the following characteristics:
1. Low power consumption, low voltage, battery-powered.
2. Utilize the principle of energized and thermally contracted muscle titanium wire to achieve the traction of the shackle, overcome the shortcomings of easy heating and burnout of the electromagnet, and stable performance.

3. Adopt a special lock hook design, which can accept high-intensity vibration and overcome the problem that the lock is easy to fall off.

Titanium Wire Electric LockTitanium Wire Electric Lock

Titanium Wire Electric Lock,Titanium Wire Electronic Control Lock,Titanium Wire Stretch Electronic Lock,Mini Titanium Wire Electric Lock

Dongguan Kaisijin Intelligent Technology Co., Ltd , https://www.dgsmartlockoems.com